پلی كربنات (PGPC-ABS 65)
پلی كربنات (PGPC-ABS 65)
| Typical Values | Unit | Condition | Test Method | Property | No. |
|---|---|---|---|---|---|
| Equal 20 | g/10 min | at 5 Kg,260 °C | ASTM D1238 | MFI | P 01 |
| Equal 1.13 | g/cm3 | at 25 °C | ASTM D792 | Density | P 02 |
| Equal 450 | Kgf/cm2 | @ yield | ASTM D638 | Tensile Strength | P 03 |
| Equal 22,000 | Kgf/cm2 | -- | ASTM D638 | Modulus of Elasticity | P 04 |
| Greater and equal 50 | % | @ Break | ASTM D638 | Elongation | P 05 |
| Equal 45 | Kj/m2 | Notched,23 °C | ASTM D256 | Izod Impact Strength | P 06 |
| Equal 41 | Kj/m2 | Notched,-30 °C | ASTM D256 | Izod Impact Strength | P 07 |
| Equal 122 | °C | at 0.45 MPa | ASTM D648 | HDT | P 08 |
| Equal 118 | °C | at 50N, 50C/h | ASTM D1525 | Vicat soft. Temp. | P 09 |
| ۱E14 | Ohm.m | -- | ASTM D257 | Volume Resistivity | P 10 |
| ۱E16 | Ohm | -- | ASTM D257 | Surface Resistivity | P 11 |
| V2 | -- | ۱.۶ mm | UL-94 | Flame Rating | P 12 |
Low viscosity
UV-stability, Mold release
Applications: Injection Products
برای نوشتن دیدگاه باید وارد بشوید.